Newest Products

Deco style tuner in chrome or black designed for any type of guitar. Reliable, no-frills design. 16 to 1 ratio. Hardware included. Fits .6 inch thick headstock

Decorative protective box corners not only add a unique more finished look but also protect your instrument. Comes with 8 corners and matching hardware Antique Brass finish

Measuring 1.4 inches wide, .3 inches all and .2 inches thick these nuts are well suited for ukuleles and other builds with thinner fretboards. They are available blank, three or four string slots.

High quality padded ukulele carry bag. Heavy padded Cordura construction Waterproof and dust proof Front panel pocket Carry handle and back pack straps 24 x 9 x 3 inches Sized for Concert Ukuleles and smaller instruments

This floating Rosewood bridge allows total flexibility in bridge placement. Dimensions are 3 1/2 by 1 1/8 inches and .35 inches tall. The length of the fret wire is 2.4, Suitable for 3,4 and 6 string builds. Can be easily glued in place once optimal location is determined.

Two way action can correct either a backbow or upbow on a neck.  Twin steel rods and brass threaded blocks allow for precise adjustments to get the perfect alignment on the neck. 4mm hex wrench included. We suggest creating a slot about .25 inches wide .5 inches deep in the neck. Make sure the slot is deep enough so that fretboard does not rest on the brass nuts. Also use a dab of E6000 or silicone caulk under each nut to prevent them from moving, do not glue the rods. The slot should be long enough to conceal the adjustment nut under the neck and/or nut.

The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from black composite material.  Ultra smooth satin finished composite fretboard 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick Available in Chromatic and Diatonic 21 frets on Chromatic and 13 on Diatonic  Face fret markers on Chromatic Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 

These covers are made specifically for the K-Nine bass pickups. they measure 3.65" by 2.0" by .32". Hardware included.

Made for bass builds and measuring 9 Kohms, these new pickups are wide enough for 4 string bass builds. They will also work for guitar installations. These low-profile pickups are designed specifically for surface mounting on cigar boxes. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Make sure the magnets face the strings. Secure the pickup to the cover with double sided tape, hot melt glue or E6000. Cover not included. Dimensions are 1.3" wide, 2.75" tall and .25" thick. Find covers here

Includes 1/4inch straight and right angle metal connectors, ensures a secure connection to any instrument, pedal, or amp jack.  Pliable 20ft guitar cable protected by high-quality pvc jacket and braided tweed cloth outer jacket, minimzing twisting, kinking and tangling.  Black with gray accent cotton weave outer jacket. Suitable for mixer, power amplifier, effects pedals, equalizer, electronic organ, electric guitar, electric bass and other electronic equipment. 

Includes two rings for adding thickness to the Fat Bottom Body.

Kit includes box, neck, reinforcement plate and back cover plate. The attractive box which measures 9 x 8 1/2 by 2 1/4 inches has a faux rosewood finish and is predrilled for neck and cover plate. The kit is available in 3 and 4 string versions. The box is long enough to allow use of standard hardtail bridges. The neck is a Deluxe Easy Neck with Rosewood fretboard. It is a 24 inch scale neck with 22 frets. This kit is ready for you to add your favorite tuners, electronics, strings and hardware. Neck includes spacer to lift the fretboard to allow the strings to pass over the Mini Box Bucker covers. You might want to use a shim on your bridge as well.

Helpful template for placing bridge in perfect alignment with the neck. Check and confirm scale length of 11.5 inches at center of saddle. • 1/8" Acrylic Watch This Video:

Minimum box length is 7 inches. Box not included. Includes 11 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and real Rosewood fret board installed, includes pre-slotted nut. Four high quality enclosed tuners with hardware. Rosewood bridge with saddle and two filler plugs. Four labeled nylon strings. Watch the Concert Ukulele kit video but make sure to check for 11 inch scale length. Ukulele Kit Includes: Neck w/hanger bolt & hardware 4 Enclosed Tuners (2 left & 2 right) & tuner hardware Nylon strings (labeled) Rosewood bridge w/bone saddle (two filler plugs) Note: Box/body not included! Watch This Video: Watch This Video:

These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.

These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.

These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.

Stamped aluminum sound hole / grommets perfect to add finish and functionality to your build. Available in Nickel, Antique Brass of Black Finish 3 inch outer diameter and 2 inch inner diameter Mounts in 2 inch hole with E6000 adhesive

Customize your build with a real wood decorative cover. Available in 13 new designs that will surely add a nice touch to your next build. These unique covers are made from .125 material. The mdf core is covered with real Maple and Cherry veneer.  Made to cover 2.5" hole Nice satin finish Glue in place (E600 works well) Covers ship with an easily removed mask cover

Traditional and Modern F hole template, includes 8 shapes sized from 3 inches to 7 inches. Use one side for one hole then flip the template for a mirrored shape. Made from 1/8 inch acrylic.

Perfect for keeping strings aligned when using a zero fret. Available in Cherry, Maple or Rosewood. 1.5" wide, .3 " tall and .2 inches thick. Remove mask on Cherry and Maple before gluing in place. Make sure strings rest firmly on the zero fret, adjust slots if need be.

Included are 4- 3 inch lengths of Jumbo fret wire. These can be placed in the zero fret slot. they are the perfect height when used with medium frets in the remaining slots.

Two pack of Rosewood thumb rests. 2 1/2 by 1/2 by 1/2 inches Mounting Screws included  

A very handy tool for testing components. You can connect the leads on your pickup directly to your amp. You can also use the alligator clips to make additional connections.

Stamped aluminum sound hole / grommets perfect to add finish and functionality to your build. Available in Nickel, Antique Brass of Black Finish 2.46 inch outer diameter and 1 1/2 inch inner diameter Mounts in 1 5/8 or 1 3/4 inch hole with E6000 adhesive 2 pack

Easy, fast and accurate  tuning with MGB's clip on digital tuner.  A4 is 440 HZ Range: A0 (27.5 HZ) - A6 (1760 HZ) Back lit display CR2032 Battery Included 360 Swivel  

Easily find the center of a box. The perfect tool for cigar box guitar builders. Rigid aluminum (.07")construction.

Quality Crafted Guitar Neck | Easy to Install This deluxe kit is similar to the standard product but includes white banding along both sides of the neck and black side fret markers. 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included, side markers not included  Bone Nut Hanger bolt and hardware included Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:

This Deluxe Kit is similar to the standard product but includes white banding along both sides of the neck and black side fret markers. Includes 15 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Fretboard is Rosewood. Frets and fret board are installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings. Ukulele Kit Includes: Neck w/hanger bolt & hardware 4 Enclosed Tuners (2 left & 2 right) & tuner hardware Nylon strings (labeled) Rosewood bridge w/bone saddle (two filler plugs) Available with Chrome, Black or Gold tuners Note: Box/body not included! Watch This Video: Watch This Video:

Black Flat Top Knurl Knob Extremely common knob that are often found on more modern guitars. Perfect for any style guitar. Black finish   Quality guitar hardware from MGB Guitars.

Neck only includes bone nuts and hardware Okume body and Walnut fretboard 20 inch scale with frets installed Fretboard is 12 inches long with 2 inch overhang Heel is 2 inches tall Two bone nuts are provided, one blank and one cut for poly stings Uses 10mm socket item 24008 Works with MGB tuners item 25105

Available in 3 and 4 string models, these new MGB Pitch Benders can add a new dimension to your CBGs. Includes all of the chrome finished components and hardware needed. Also includes a template to provide accurate location and sizing of hole for the bridge and locations for mounting screws. Critical steps for installation: Use the template (included) for accurate lay-out of holes. Make sure to line up the box center line and scale length line.  Secure anchor block (2 1/2 x 4  inches) to inside of lid. It should meet with edge of hole. The bridge screws will need to go through the lid and into the block. Do not over tighten screws that secure the bridge. The bridge must lay flat against the box, see pic. The bridge will need to pivot to shorten the strings and bend the pitch. Anchor the springs to provide tension, you can use the spring bracket or install screws in the anchor block. Our experience shows that stretching the strings about 1/2 inch from the normal state provides the right tension. This tension will will keep the bridge flat and allow tuning. Bending the bar will further stretch the springs and allow the bridge to pivot. The 3 string uses two springs and the 4 string uses three springs. The strings are bottom loading so access through the back of the box is needed.